Tips to know the damage a computer and how to fix it

Damage to the PC / computer is very diverse and varied, for that we must know the location of damage to the computer at this time is discussed tips to know the damage on the pc and how to fix / improve it.

First step before repair pc pc is mengetahi damage to it, there are two types of damage to the pc that is software and hardware damage

1. The first damage to the software can be caused by a virus, or because the file is missing sitemnya software damage including damage to the light.

Signs / characteristics:

• All computer components can still light up, but could not get into windows / system Operting
• When it says insert system disk is monitored, try to tighten hardisknya usually lax due to the hard drive. If you can not mean the system is broken and fix it easily step is reinstalled.
• If a Sistem32 mising means the file is missing and the same should be re-installed OS.

2.Keruskan on hardware: DAMAGE TO POWER supply

The computer can not burn at all, check all power cables are already connected to the electricity properly, check the swich button behind the cpu at a position on, check power on the cable is good or not, if there are symptoms such as faulty power supply means. and should be replaced new.

DAMAGE TO THE MOTHER BOARD

When turned on, no display on the monitor, indicator light (LED) on the front panel is lit, the indicator light (LED) flashing monitors, power supply fan and processor fan spins, no beep sound on the speakers.

DAMAGE TO VGA AND MONITOR

The computer is on but no display on the monitor, you hear a bib when turned on. Likelihood or the damage to the VGA on the monitor can also try a test with a VGA or Monitor a friend who is still functioning.

DAMAGE TO Notebook computer is on, can not get into windows and the hard drive is not detected, try to tighten the cable hardisknya. DAMAGE TO RAM Power supply is lit, can not get into windows and there is no sound bib. The point in fixing the computer we first have to know the damage, could done by an error try or experiment with other computer components that can be reused and have the same type of component. If your computer can still light up but can not get into windows means your computer is still safe and most likely the OS or any component that is not tight / loose pemasanganya. Thank hopefully useful ....!!!!